The (Hopefully) Definitive TrenShadow Guide (1.00)

[mattinm]

Updated TrenShadow Guide (2.00)

This guide is intended as a consolidation of the TrenShadow installation and usage process, as well as explain breifly how TrenShadow works. If you notice anything missing or wrong, don't hesitate to post/PM me about it, and I'll attempt to make the appropriate change. Hopefully this guide can help a few people time-travel!

Table of Contents
1. How does TrenShadow work?
2. Where can I get TrenShadow?
2a.) Personal Packages
2b.) Official Releases
3. Installing TrenShadow
3a.) Normal installation
3b.) Converting from multiple installation points
4. Creating your own TrenShadow version folder
5. Original TrenShadow potential problems
6. Frequently Asked Questions
6a.) Can I use pre-LoD folders?
6b.) Can I create classic characters in older LoD versions?
6c.) Can I run mods (e.g. RWM/RRM in 1.12a) with TrenShadow?
6d.) Are pre-1.12a versions run-able with the Blizzard Downloadable installer?
6e.) Is it necessary to copy the files for the Glide wrapper into each version folder in order to have them run in Glide mode?
7. Feedback

1. How does TrenShadow work?

TrenShadow is a relatively simple Visual Basic script that first backs up the current game files (Game.exe, Patch_D2.mpq, and all .dll files). It then copies over those same files from the TrenShadow version. Once the files are replaced, TrenShadow changes a registry entry to point all Diablo II save files to the version folder instead of the main installation folder (e.g. Diablo II/1.09b/save instead of Diablo II/save).

Once the last instance of TrenShadow is closed, all settings are reverted. This means that you can run your current version as you normally would.

2. Where can I get TrenShadow

2a.) Personal Packages
I have modified the TrenShadow script slightly (with the blessing of TrenShadow himself) to both increase functionality, decrease the risk of corrupting your main Diablo II installation, simplify running multiple instances, and allow the user the choice of not displaying the default popups.

You can find all my repackaged versions (and the updated LaunchModGame.vbs script) in the 'Files' section of the forum: here.

2b.) Official TrenShadow Packages
All official packages can be find here. Note: These files end in .zzz; simply rename them to .zip and they will act as a normal zip archive.

Warning: The information contained in this guide assumes you are using the updated version of LaunchModGame.vbs as linked to in [2a].

3. Installing TrenShadow

3a.) Normal Installation
Windows Vista/7 Compatibility Note

Spoiler

I recommend changing your main installation Game.exe (e.g. Diablo II/Game.exe) compatibility settings as shown in this pic. I've ran into missing .dll and visual issues when running older patches, and these are the settings that I have found to work on four separate computers.

/END compatibility section

Download and unzip a version folder from section (2). Throughout the guide I will refer to version 1.07 for simplicity; simply replace with your downloaded version as needed.

Copy the folder into you main Diablo II installation pic. Create a shortcut of LaunchModGame.vbs on your desktop pic. Now, rename the shortcut (e.g. Diablo II - 1.07).

Now, right click the shortcut and select "Properties". In the "Shortcut" tab, ensure that the "Target" and "Start In" lines correctly match the location of the version folder pic. You can add any Diablo II flags to the end of the "Target" line (e.g. -w -3dfx -direct -txt) as well as -noprompt to stop the TrenShadow popups pic.

If you want, you can also change the icon to the Diablo II icon. First, click "Change Icon..." pic, then "Browse..." pic, select your Diablo II.exe file, and say "OK".

Note: Running versions prior to 1.12a requires the CD to be in the drive. If nothing appears to happen when running TrenShadow, double-check the CD is in the drive, as there will be no notice as to why it didn't work.

3b.) Converting from a low-tech installation using multiple installation points

Spoiler

Make sure the current patch is in your working Diablo II directory (e.g. C:/Program Files/Diablo II). Download the corresponding version folder from section (2) for the version(s) you wish to run and install them as explained above.

Now, simply copy over your "save" folder(s) from the other Diablo II installation into the corresponding TrenShadow version folder(s) and all your characters should be accessible. I'd recommend testing before deleting my old installations however .

4. Creating your own TrenShadow folder

This should be unnecessary, as I've released all version folders above. To create your own version folder, you will need LaunchModGame.vbs and RecoverFromCrash.vbs (see section [2]).

Copy the following files, along with the two .vbs files above, from the version of Diablo II you which to replicate:

*Note: If you downloaded my folder versions, they do not contain these files,
       as the files don't appear to change between patches. Simply copy these
       from your main installation point.

binkw32.dll
Bnclient.dll
D2Client.dll
D2CMP.dll
D2Common.dll
D2DDraw.dll
D2Direct3D.dll
D2Game.dll
D2Gdi.dll
D2gfx.dll
D2Glide.dll
D2Lang.dll
D2Launch.dll
D2MCPClient.dll
D2Multi.dll
D2Net.dll
D2sound.dll
D2Win.dll
Fog.dll
Game.exe
ijl11.dll *
Storm.dll
SmackW32.dll *
Patch_D2.mpq

5. Original TrenShadow potential problems

Note: Using my modified version of TrenShadow alleviates the concerns below. As such, I highly recommend using the updated version of TrenShadow, as packaged in my version folders.

When running multiple instances using the original TrenShadow, one had to make sure to close the very first instance *last*. Otherwise, the save folder, and perhaps even all the *.dll and patch_d2.mpq files, would revert to their old settings, causing all sorts of problems. I have lost my original Game.exe as well as saving characters into the wrong folder because of this issue.

6. Frequently Asked Questions

Q: Can I use pre-LoD folders?
A: Absolutely! In fact, I've bundled together all of them in section (2) for you consumption.

Q: Can I create classic characters in older LoD versions?
A: Yep! Simply un-tick the []Expansion setting on character creation, just as you would in the current patch. Just don't try this with an Assassin or Druid or you could be there for a while .

Q: Can I run mods (e.g. RWM/RRM in 1.12a) with TrenShadow?
A: Certainly! Simply copy the data folder from the mod (e.g. Runewords/data pic) and paste it into your version folder (e.g. Diablo II/1.12a/data pic). Now, make sure to add -direct -txt to the end of your shortcut pic and you'll be good to go!

Q: Are pre-1.12a versions run-able with the Blizzard Downloadable installer?
A: Unfortunately not. To run versions prior to 1.12a, when the no-cd feature was introduced, you must have a copy of the Diablo II/LoD (for Classic/LoD, respectively) in order to play pre-1.12a versions.

Q: Is it necessary to copy the files for the Glide wrapper into each version folder in order to have them run in Glide mode?
A: Nope. You only need the Glide Wrapper files to be in the main installation point (e.g. C:\Program Files\Diablo II). Because the version files are copied into this location by TrenShadow when ran, it will automatically locate the glide3x.dll, as well as the settings to use Glide.

7. Feedback
Hopefully this will help newcomers and first-time time-travellers to use multiple version of Diablo II. If there is anything unclear, simply post here or PM me and I'll be glad to clear things up.

Good luck!

[Pijus]

This is awesome!

1.09 HF rush, here I come!

[ioupainmax]

Awesome, I'm sure this will help a lot of people and prevent thread spammage (yeah ... I'm guilty of this - sorry)

I'm guessing this is going to be stickied very soon and rightly so - it is much needed.

EDIT: I don't know the forum stance on having an ISO to make version switching less cumbersome - especially if you only have one CD/DVD drive like me. This might be a good addition as I know that you have one for this purpose alone. I tried to make one with PowerISO but for some reason it didn't work, I must be doing it wrong. Can any mods chime in on this? Feel free to delete this bit of my post if it's against forum rules. The reason I mention this is, because I think it is possible to contact blizzard and download the game as long as you have a valid CD-Key. I haven't done this, so I'm not sure what format it is downloaded in.

[nubikoen]

Great guide!
Enough info to give some insight as to what's going on, yet simple and to the point.

Now, anyone care to do a Vista special?
It works just fine on my XP Machine, but not so much on my Vista one.

[SnickerSnack]

I guess you can disregard my pm now.

Now, anyone care to do a Vista special?
It works just fine on my XP Machine, but not so much on my Vista one.

+1

[mattinm]

I don't know the forum stance on having an ISO to make version switching less cumbersome - especially if you only have one CD/DVD drive like me. This might be a good addition as I know that you have one for this purpose alone. I tried to make one with PowerISO but for some reason it didn't work, I must be doing it wrong. Can any mods chime in on this? Feel free to delete this bit of my post if it's against forum rules. The reason I mention this is, because I think it is possible to contact blizzard and download the game as long as you have a valid CD-Key. I haven't done this, so I'm not sure what format it is downloaded in.

I use an ISO file on my netbook to run multiple LoD versions, because hauling around a portable drive is just not practical. I think I burned mine with ImgBurn, but I'm not 100% on this. I can't imagine it being against the rules, however, discussing any method of illegally obtaining ISO's most definitely would be. As for the download, it's an executable that installs LoD with the latest patch.

And thanks for the spelling catch

Great guide!
Enough info to give some insight as to what's going on, yet simple and to the point.

Now, anyone care to do a Vista special?
It works just fine on my XP Machine, but not so much on my Vista one.

That's quite odd, really. I've got mine running in Vista x64. However, I run with UAC (User Access Controls) off, and that might make a difference. The Linux user in me hates me for turning UAC off, but, imho, Windows is riddled with enough holes that I'm not too concerned about another one. I wouldn't really recommend turning it off, because it is a security feature, and one you'll have to decided to use/not use yourself.

I guess you can disregard my pm now.

... I was just about to link you to this

[ioupainmax]

I use an ISO file on my netbook to run multiple LoD versions, because hauling around a portable drive is just not practical. I think I burned mine with ImgBurn, but I'm not 100% on this. I can't imagine it being against the rules, however, discussing any method of illegally obtaining ISO's most definitely would be. As for the download, it's an executable that installs LoD with the latest patch.

Ok, I will try that out, does the program do everything itself or must I do something extra?

I spoke with a mod and they said that burning an ISO Image of a legit CD is fine, so that you don't damage your original. As well as the fact that Blizzard put a no CD patch out themselves so it seems they are ok with it (CDs don't last forever!)

[mattinm]

Ok, I will try that out, does the program do everything itself or must I do something extra?

I spoke with a mod and they said that burning an ISO Image of a legit CD is fine, so that you don't damage your original. As well as the fact that Blizzard put a no CD patch out themselves so it seems they are ok with it (CDs don't last forever!)

Yeah, the program is extremely intuitive. I don't really want to get into the specifics of how to mount it though, at least without mod approval. I'll send a PM asking them if I can add a small section for the creation of an ISO file from legit discs as it is definitely faster/less noisy than having a physical disc, and, as you said, saves the disc from wear and tear.

It's just a shame that I've had no success making a mini-image. I've been able to find a legit way in most of my games which saves incredible amounts of space.

[Pijus]

@Mattinm: That thing I PM'ed you about yesterday. You should put the explanation in the guide

[mattinm]

@Mattinm: That thing I PM'ed you about yesterday. You should put the explanation in the guide

Done . I added it to the beginning of the installation section. Let me know if it's unclear, but I think it explains how to convert and the potential problems well enough.